 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High Capacity Standard Size Toggles GENERAL SPECIFICATIONS FOR S800s ~ S732 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Series S Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum for S800s & S800Ds 3,000V AC minimum for 1 minute minimum for S732 50,000 operations minimum 10,000 operations minimum for S800Ds 25,000 operations minimum for S800s & S732 Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor Plate: Movable & Stationary Contacts: Common Terminals: Contact Terminals: Brass with nickel plating for S732 Brass with chrome plating for S800s & S800Ds Brass with chrome plating Phenolic resin for S732; melamine phenol for S800s Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Brass Brass with silver or nickel plating Environmental Data Operating Temp Range: -10C through +70C (+14F through +158F) Installation Mounting Torque: Maximum Panel Thickness: 2.94Nm (26 lb*in) for double nut Shown beneath panel cutout in switch dimension drawings Standards & Certifications UL Recognized: Designated with UL recognized symbol beside part numbers on following pages See Supplement section to find UL rating details. UL File No. WOYR2.E44145 Add "/U" to end of part number to order UL mark on switch. Designated with C-UL recognized symbol beside part numbers on following pages See Supplement section to find C-UL rating details. C-UL File No. WOYR8.E44145 Add "/C-UL" to end of part number to order C-UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages See Supplement section to find CSA rating details. File No. 023535-0-000 Add "/C" to end of part number to order CSA mark on switch. C-UL Recognized: CSA Certified: NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 High Capacity Standard Size Toggles DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals Down Keyway Series S Inductive Motor Load AC 125V Electrical Capacity Resistive AC 125V AC 250V DC 30V DC 125V Center Up Model S821 S822 S823 R Approvals R Pole & Throw DPST DPDT DPDT DPST 3 6 AC 125V PF 0.6 AC 250V PF 0.6 ON ON ON 2-3 5-6 2-3 5-6 2-3 5-6 2 (COM) NONE NONE OFF 5 OFF ON ON -- 2-1 5-4 2-1 5-4 DPDT 30A 30A 30A 2 3 30A 30A 30A (COM) 1 6 30A 30A 30A 5 4 1A 1A 1A 30A 30A 30A 15A 15A 15A 750W -- -- R R R R Throw & Schematics: Note: Terminal numbers are on the switch * Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 6 3 M4.5x6 (12.5) Dia .492 (42.0) 1.654 (9.0) .354 (3.0) Dia .118 28 (12.0) Typ .472 (6.1) Dia .240 5 4 2 1 (12.0) .472 (22.0) .866 (12.0) .472 (34.0) 1.339 (24.0) .945 S822 S821 does not have terminals 1 & 4 Maximum Panel Thickness: .177" (4.5mm) THREE POLE WITH SCREW LUG Toggle Position/Connected Terminals Down Model S831 S832 S833 Throw & Schematics: R Electrical Capacity Resistive AC 125V AC 250V DC 30V DC 125V Center Up Inductive AC 125V PF 0.6 AC 250V PF 0.6 Approvals R Pole & Throw 3PST 3PDT 3PDT ON ON ON 5 6 Keyway 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 (COM) 9 8 NONE NONE OFF OFF ON ON -- 2-1 5-4 8-7 2-1 5-4 8-7 2 3 1 6 5 30A 30A 30A (COM) 4 9 30A 30A 30A 8 7 30A 30A 30A 1A 1A 1A 30A 30A 30A 15A 15A 15A R R R R 3PST 3 2 3PDT Note: Terminal numbers are on the switch * Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 6 9 3 M4.5x6 (12.5) Dia .492 28 (12.0) Typ .472 (6.1) Dia .240 5 8 7 4 2 1 (42.0) 1.654 (9.0) .354 (3.0) Dia .118 (14.5) Typ .571 (22.0) .866 (12.0) .472 (34.0) 1.339 (43.0) 1.693 S833 S831 does not have terminals 1, 4 & 7 Maximum Panel Thickness: .177" (4.5mm) 03-07 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com High Capacity Standard Size Toggles DOUBLE & THREE POLE WITH SCREW LUG & FLATTED LEVER Toggle Position/Connected Terminals Down Model S821D S822D S823D Throw & Schematics: S831D S832D S833D Throw & Schematics: R R R Series S Inductive L/R = 3ms Electrical Capacity Resistive DC 30V DC 48V DC 125V DC 250V Center Up Approvals R Pole & Throw DPST DPDT DPDT ON ON ON 2 Keyway DC 24V DC 48V DC 125V DC 250V 2-3 5-6 2-3 5-6 2-3 5-6 (COM) 6 5 NONE NONE OFF OFF ON ON DPDT -- 2-1 5-4 2-1 5-4 2 3 30A 30A 30A (COM) 1 6 30A 30A 30A 5 15A 15A 15A 7.5A 7.5A 7.5A 15A 15A 15A 10A 10A 10A 6A 6A 6A 3A 3A 3A R R R R DPST 3 4 Note: Terminal numbers are on the switch 7.5A 7.5A 7.5A 15A 15A 15A 10A 10A 10A 6A 6A 6A 3A 3A 3A 3PST 3PDT 3PDT 2 ON 2-3 5-6 8-9 ON 2-3 5-6 8-9 ON 2-3 5-6 8-9 5 6 (COM) 9 8 NONE NONE OFF OFF -- 30A 30A 30A 5 1 6 30A 30A 30A (COM) 4 9 15A 15A 15A 8 7 R R ON 2-1 5-4 8-7 ON 2-1 5-4 8-7 3PDT 2 3 R R 3PST 3 Note: Terminal numbers are on the switch * Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 Double Pole M4.5x6 6 3 (12.5) Dia .492 (42.0) 1.654 (9.0) .354 (3.0) Dia .118 28 (12.0) Typ .472 (4.0) .157 (8.15) .321 5 4 2 1 (12.0) .472 (9.0) .354 (27.0) 1.063 (12.0) .472 (34.0) 1.339 (24.0) .945 S821D does not have terminals 1 & 4 Three Pole Keyway Maximum Panel Thickness: .177" (4.5mm) 6 9 3 5 8 7 4 2 1 (42.0) 1.654 (14.5) Typ .571 (9.0) .354 (43.0) 1.693 S832D S831D does not have terminals 1, 4 & 7 Positive (+) must be connected to end terminals & negative to common terminals NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 High Capacity Standard Size Toggles DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals Down Model S732 Throw & Schematics: Approvals -- -- Pole & Throw DPDT ON 2 Keyway Series S Inductive DC 30V AC 125V PF 0.6 Electrical Capacity Resistive AC 125V AC 250V Center Up 2-3 5-6 (COM) 1 6 5 NONE ON 2-1 5-4 50A 30A 50A 25A DPDT 3 4 Note: Terminal numbers are on the switch * Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M4 x 10 M6 x 8 M12 P1 (17.0) Typ .669 (50.0) 1.969 32 6 3 5 2 (60.0) 2.362 4 1 (10.0) Dia .394 (38.0) 1.496 (29.5) 1.161 (10.0) .394 (39.0) 1.535 (18.0) .709 Cap of phenolic resin is black Panel Mount with Mounting Screws (4.5) Dia Typ .177 (12.5) Dia .492 (25.0) Typ .984 Maximum Panel Thickness: .158" (4.0mm) Panel Mount with Bushing Hardware (12.5) Dia .492 (9.0) .354 (3.0) Dia .118 (12.5) Dia .492 (11.5) .453 (12.5) Dia .492 (1.5) .060 S732 Maximum Panel Thickness: .079" (2.0mm) Maximum Panel Thickness: .118" (3.0mm) Maximum Panel Thickness: .118" (3.0mm) NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 |
Price & Availability of S823
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |